Question Avalon INDI Driver commands

Hi,
I would like to do some work on the Avalon INDI driver to make it fully featured. This would help people who are running on Linux only and cannot use the Windows interface.
I am one of the developers who work on the current driver. The only thing stopping me bringing in all features is that I have not been able to work out all the commands and responses for the mount.
I also noticed that the startup command sequence has changed in the latest firmware.
Are you able to share the command set?

Hi Stefano

The functionality I want to provide is as follows:
a) Ability to set center and find speeds. I know the command for setting these values but I cannot work out the command to get the current settings from the mount to display
b) Ability to set the mount type (M-Uno, M-Zero, Linear etc) for initial configuration. I have most of the commands but need to understand the correct procedure e.g. when to restart the mount
c) Confirm the correct starting commands when the mount is first connected. I can see the starting commands sent from the Windows StarGo driver to my M-Uno but don't know what some of the commands are or if they are needed for correct operation. List of unknown commands is attached
d) Provide complete focuser functions for AUX1 and AUX2(I think this is nearly done already for AUX1)
I am also removing the dependency on the old LX200 driver code. You can see the current state of the driver in my repo at:
github.com/ken-self/indi-3rdparty/tree/stargo/indi-avalon

Let me know if you'd like to take the discussion offline to email.

PM sent with my email address

Thanks Ken for working on the Avalon INDI driver and thanks Stefano for provinding Ken with information that can make the Avalon INDI driver better.

I have recently acquired a M-Uno Dual and have been working with kstars/EKOS/INDI under Ubuntu Linux for some time, where I feel at home so any improvement is much appreciated.

Thanks for all your efforts.

Gilles