- Posts: 5
- Thank you received: 0
Question ASCOM settings
- tcorridan
- Topic Author
- Offline
- New Member
-
Less
More
22 Jul 2021 00:19 #608
by tcorridan
ASCOM settings was created by tcorridan
Can anyone please help. I have a Linear mount and I would like to check the ASCOM settings. Can anyone tell how I can do this?
Many thanks.
Terry
Many thanks.
Terry
Please Log in or Create an account to join the conversation.
- Stefano82
-
- Offline
- Administrator
-
- Don't panic
23 Jul 2021 12:38 #610
by Stefano82
Stefano
Avalon Instruments Team
Replied by Stefano82 on topic ASCOM settings
Hello.
What do you mean for ASCOM settings?
Please let us know more precisely how would you like to work, in this way we can better help you.
Best regards
What do you mean for ASCOM settings?
Please let us know more precisely how would you like to work, in this way we can better help you.
Best regards
Stefano
Avalon Instruments Team
Please Log in or Create an account to join the conversation.
- tcorridan
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 5
- Thank you received: 0
24 Jul 2021 02:34 #611
by tcorridan
Replied by tcorridan on topic ASCOM settings
Hi Stefano,
Thanks for answering. I have a problem with my guiding and I wanted to check the RA Rate and DEC Rate.
The problem is that recently I am experiencing spikes in my RA and DEC that never used to occur (see attachment of my guide logs). I have recently upgraded my StarGo software to 6.5.11, firmware to 6.2.0 and ASCOM driver to 6.8.4.3. I have done new calibration but the spikes persist. Can you please help?
Guide Log: drive.google.com/file/d/1md5_gYmlOYzzpkV...Ju-/view?usp=sharing
Debug Log: drive.google.com/file/d/1Xh_4ahIb3MAFgET...VOv/view?usp=sharing
Thanks for answering. I have a problem with my guiding and I wanted to check the RA Rate and DEC Rate.
The problem is that recently I am experiencing spikes in my RA and DEC that never used to occur (see attachment of my guide logs). I have recently upgraded my StarGo software to 6.5.11, firmware to 6.2.0 and ASCOM driver to 6.8.4.3. I have done new calibration but the spikes persist. Can you please help?
Guide Log: drive.google.com/file/d/1md5_gYmlOYzzpkV...Ju-/view?usp=sharing
Debug Log: drive.google.com/file/d/1Xh_4ahIb3MAFgET...VOv/view?usp=sharing
Please Log in or Create an account to join the conversation.