Question Stargo (linear) - Focus controller

Hi Everyone;

In case anyone else is wondering in the future, I just wanted to confirm and document that the Optec QuickLynx focusers (RJ45 connection), can be driven by the stargo AUX ports (v1), and that you wouldn't need a separate focus controller.  The aux ports are a RJ9 connector (this is not mentioned in the stargo manual!).  I believe these are essentially the same focuser that FeatherTouch sold with the RJ45 connection as well.

Wiring is as follows (thank you to Stefano for his help on this):

- from StarGo aux Pin1 -> to Optec Pin 3
- from StarGo aux Pin2 -> to Optec Pin 6
- from StarGo aux Pin3 -> to Optec Pin 7
- from StarGo aux Pin4 -> to Optec Pin 8