- Posts: 1
- Thank you received: 0
Solved meridian flip fallito con sgp
- igor.lamberti
- Offline
- New Member
-
Less
More
02 Feb 2022 19:28 #870
by igor.lamberti
Replied by igor.lamberti on topic meridian flip fallito con sgp
Novità sul rilascio di un bug fix riguardo a questa problematica ?
grazie
grazie
Please Log in or Create an account to join the conversation.
- Stefano82
-
- Offline
- Administrator
-
- Don't panic
03 Feb 2022 10:55 #872
by Stefano82
Stefano
Avalon Instruments Team
Replied by Stefano82 on topic meridian flip fallito con sgp
Hi all
As previously described in this thread, for SGP users is suggested the SP6 version, since from our tests and from feedback coming by many users, it work properly with the above mentioned software.
For users that face this Meridian Flip failure even using SGP with StarGo 620 SP& please note that, due to particular SGP configuration, it is required to set the Meridian Flip at least 5/10 minutes after crossing the Meridian.
The StarGo 6.5.6 version it is suggested for N.I.N.A. users, since this version fixed the Slewing during plate solve bug with this software.
Best regards
As previously described in this thread, for SGP users is suggested the SP6 version, since from our tests and from feedback coming by many users, it work properly with the above mentioned software.
For users that face this Meridian Flip failure even using SGP with StarGo 620 SP& please note that, due to particular SGP configuration, it is required to set the Meridian Flip at least 5/10 minutes after crossing the Meridian.
The StarGo 6.5.6 version it is suggested for N.I.N.A. users, since this version fixed the Slewing during plate solve bug with this software.
Best regards
Stefano
Avalon Instruments Team
Please Log in or Create an account to join the conversation.
- Schaefer
- Offline
- Junior Member
-
Less
More
- Posts: 35
- Thank you received: 0
04 Feb 2022 15:30 #874
by Schaefer
Hi Stefano,
I already wrote to the forum and also directly via email to you that this is actually not the case. At least not, when you are using the current Beta version of NINA 2.0. The 'fix' in 656 introduced a new bug, which leads to slewing errors again. You fixed the synchronous slewing command but broke the asynchronous slewing command, which is used by NINA and may be other software as well.
It might be ok to use the 656 version in the 1.x version of NINA (which most likely nobody uses anymore) But I can only recommend using 620SP6 when you are running the recent NINA 2.0 version which has tons of improvements since 1.x.
Regards,
Stephan
Replied by Schaefer on topic meridian flip fallito con sgp
Stefano82 wrote: Hi all
The StarGo 6.5.6 version it is suggested for N.I.N.A. users, since this version fixed the Slewing during plate solve bug with this software.
Best regards
Hi Stefano,
I already wrote to the forum and also directly via email to you that this is actually not the case. At least not, when you are using the current Beta version of NINA 2.0. The 'fix' in 656 introduced a new bug, which leads to slewing errors again. You fixed the synchronous slewing command but broke the asynchronous slewing command, which is used by NINA and may be other software as well.
It might be ok to use the 656 version in the 1.x version of NINA (which most likely nobody uses anymore) But I can only recommend using 620SP6 when you are running the recent NINA 2.0 version which has tons of improvements since 1.x.
Regards,
Stephan
Please Log in or Create an account to join the conversation.
- Schaefer
- Offline
- Junior Member
-
Less
More
- Posts: 35
- Thank you received: 0
04 Feb 2022 15:41 #875
by Schaefer
Replied by Schaefer on topic meridian flip fallito con sgp
See also here:
www.avalon-instruments.com/forum/welcome...-slew-center-in-nina
and here, in the original thread where we discussed it the first time:
www.avalon-instruments.com/forum/install...f-a-goto?start=6#552
www.avalon-instruments.com/forum/welcome...-slew-center-in-nina
and here, in the original thread where we discussed it the first time:
www.avalon-instruments.com/forum/install...f-a-goto?start=6#552
Please Log in or Create an account to join the conversation.
- Stefano82
-
- Offline
- Administrator
-
- Don't panic
31 Mar 2022 08:04 - 31 Mar 2022 08:04 #915
by Stefano82
Stefano
Avalon Instruments Team
Replied by Stefano82 on topic meridian flip fallito con sgp
Hello
It has been published a reply about this issue at the following forum topic link:
www.avalon-instruments.com/forum/welcome...nter-in-nina?start=6
Best regards
It has been published a reply about this issue at the following forum topic link:
www.avalon-instruments.com/forum/welcome...nter-in-nina?start=6
Best regards
Stefano
Avalon Instruments Team
Last edit: 31 Mar 2022 08:04 by Stefano82.
Please Log in or Create an account to join the conversation.