Question Avalon Stargo INDI driver

That’s a pity! Meanwhile i’ve asked ZWO for some more info.

hi,

just found a bug in this driver (in both INDI drivers, actually - legacy and stargo).
when it starts, it messes up and usb hub on any asi camera (in my case, asi183mm pro).
here's part of the log:

Apr 28 23:41:04 madcatz kernel: [ 366.416513] usb 1-1: USB disconnect, device number 12
Apr 28 23:41:04 madcatz kernel: [ 366.416518] usb 1-1.2: USB disconnect, device number 13
Apr 28 23:41:04 madcatz kernel: [ 366.417196] usb 1-1.3: USB disconnect, device number 14
Apr 28 23:41:04 madcatz upowerd[1148]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1:1.0
Apr 28 23:41:04 madcatz upowerd[1148]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04D8:003F.0002
Apr 28 23:41:04 madcatz upowerd[1148]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.2
Apr 28 23:41:04 madcatz upowerd[1148]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.0
Apr 28 23:41:04 madcatz upowerd[1148]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3
Apr 28 23:41:04 madcatz upowerd[1148]: unhandled action 'unbind' on /sys/devices/pci0000:00/0000:00:15.0/usb1/1-1
Apr 28 23:41:06 madcatz kernel: [ 367.577922] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
Apr 28 23:41:07 madcatz kernel: [ 368.556605] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
Apr 28 23:41:07 madcatz kernel: [ 368.556701] usb usb1-port1: attempt power cycle
Apr 28 23:41:08 madcatz kernel: [ 369.847463] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
Apr 28 23:41:09 madcatz kernel: [ 370.825752] usb usb1-port1: Cannot enable. Maybe the USB cable is bad?
Apr 28 23:41:09 madcatz kernel: [ 370.825847] usb usb1-port1: unable to enumerate USB device

any news about this? is it still developed?

Could you please give more details when this happens? I'm not the expert how USB devices are handled inside the Linux kernel, but to me it looks like this is a problem between the Linux kernel and the USB port of the StarGO device.

Please share details of your hardware and software configuration as well as details what leads to the described problems.

I know, it is not very helpful, but in my installation at least the main ASI camera and the StarGO USB connection live together fine.

Wolfgang

Still trying to resolve the problem.

In terms of connectivity to the StarGO2 Pro with the ASIAIR, there seems to be no change to previous versions of the ASIAIR app. I am a beta user for the ASIAIR App (v2.0.x, FW 10.y) on both iPadOS and MacOS on a Macbook with an M1 processor.

The StarGO2 Pro can only be controlled with the Avalon Legacy driver, which is identical to the LX200 Basic INDI driver. Since this connection utilises the port address 9264, it is actually using the SkySafari INDI driver and NOT the native mount driver.

This connections allows for GOTO and re-centering with plate solving. Guiding and interactive slewing is not supported. The lack of guiding is the most annoying issue.